Salta al contenuto principale

Lenovo Legion Y520-15IKBN Fan Replacement

Cosa ti serve

  1. Lenovo Legion Y520-15IKBN Fan Replacement, Base Panel: passo 1, immagine 1 di 1
    • Shut down and unplug your device before proceeding.

    • Remove the thirteen 6.5 mm screws from the base plate using a Phillips #00 screwdriver.

  2. Lenovo Legion Y520-15IKBN Fan Replacement: passo 2, immagine 1 di 1
    • Flip the laptop on its side and wedge a spudger between the base panel and chassis, then pry around the perimeter until the base panel releases.

    • To get a better grip you may want to open the laptop slightly.

    • Lift the bottom panel off of the chassis.

    • During reassembly, make sure that the bottom panel clicks back into place on all four sides of the laptop.

  3. Lenovo Legion Y520-15IKBN Fan Replacement, Fan: passo 3, immagine 1 di 3 Lenovo Legion Y520-15IKBN Fan Replacement, Fan: passo 3, immagine 2 di 3 Lenovo Legion Y520-15IKBN Fan Replacement, Fan: passo 3, immagine 3 di 3
    • There is a piece of plastic covering part of the RAM and the fan. You will need to remove this to get to the fan.

    • Unplug the battery then, you will need to remove the four 4mm screws around the fan using a Phillips #00 screwdriver.

  4. Lenovo Legion Y520-15IKBN Fan Replacement: passo 4, immagine 1 di 3 Lenovo Legion Y520-15IKBN Fan Replacement: passo 4, immagine 2 di 3 Lenovo Legion Y520-15IKBN Fan Replacement: passo 4, immagine 3 di 3
    • Unscrew all the screws then unplug the wires connected to the fan.

    • Once all the wires are unplugged from the fan, move the wires aside to get the fan.

  5. Lenovo Legion Y520-15IKBN Fan Replacement: passo 5, immagine 1 di 3 Lenovo Legion Y520-15IKBN Fan Replacement: passo 5, immagine 2 di 3 Lenovo Legion Y520-15IKBN Fan Replacement: passo 5, immagine 3 di 3
    • Lift the fan out of the laptop body.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 9 persone hanno completato questa guida.

3 Commenti

Superb guide. thank you random citizen for creating this guide

Fikri Nur Nafi - Replica

Do I need to remove the fan if I want to clean it or add oil?

Ziro Hutt - Replica

Is there a way to open the fan to clean the dust from the blade ?

Apalagi08 - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 2

Ultimi 7 Giorni: 11

Ultimi 30 Giorni: 33

Tutti i Tempi: 7,305