Salta al contenuto principale

Introduzione

If the laptop is lagging, and the mouse is slow to react, use this guide to replace your hard drive.

  1. Turn off your laptop before you begin.
    • Turn off your laptop before you begin.

  2. Remove the nine 6mm screws circled in the picture using a T5 Torx Screwdriver. Remove the two 10mm screws circled in the picture using the same T5 Torx Screwdriver.
    • Remove the nine 6mm screws circled in the picture using a T5 Torx Screwdriver.

    • Remove the two 10mm screws circled in the picture using the same T5 Torx Screwdriver.

  3. After all of the screws are removed, use the iFixit opening tools to carefully snap the black cover off. After all of the screws are removed, use the iFixit opening tools to carefully snap the black cover off.
    • After all of the screws are removed, use the iFixit opening tools to carefully snap the black cover off.

  4. Remove the three 4 mm Philips screws circled in the picture using a T5 Torx Screwdriver. Remove the three 4 mm Philips screws circled in the picture using a T5 Torx Screwdriver.
    • Remove the three 4 mm Philips screws circled in the picture using a T5 Torx Screwdriver.

  5. Lift it upwards and pull out the hard drive.
    • Lift it upwards and pull out the hard drive.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Isaiah Vang

Membro da: 04/10/2018

645 Reputazione

6 Guide realizzate

Team

UW Stout, Team S6-G6, Ogden Fall 2018 Membro di UW Stout, Team S6-G6, Ogden Fall 2018

UWSTOUT-OGDEN-F18S6G6

4 Membri

6 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 4

Ultimi 30 Giorni: 18

Tutti i Tempi: 265