Introduzione

Your screen might need replacement if there are any noticeable cracks on screen or if you are experiencing persistent flickering during use of your Lenovo IdeaPad Flex4-1130.

Parti

Nessuna parte richiesta.

  1. Power off your Lenovo Ideapad Flex4-1130 before beginning disassembly.
    • Power off your Lenovo Ideapad Flex4-1130 before beginning disassembly.

    • Remove the ten 4mm screws from the back panel.

  2. Insert the spudger into the groove work your way around the laptop to separate the bottom from the case.
    • Insert the spudger into the groove work your way around the laptop to separate the bottom from the case.

    • Do not insert the spudger too deep! This could potentially damage a device part.

    • Remove the connector attaching the battery to the motherboard.

    • Remove the four 4mm screws on the battery.

    • Lift the battery with a spudger and remove.

    • Remove six 7mm screws.

    • Remove two connector cables.

    • Separate the two unhinged parts.

    • Use the spudger to remove the plastic caps, uncovering the screws underneath.

    • Remove the two 6mm screws.

    • Use the black nylon spudger to remove the long plastic covering underneath the screen.

    • Remove three 6mm screws.

    • Use the black nylon spudger to lift and separate the screen from the plastic back cover.

    • Peel off tape and remove the cable.

    • Remove the connector chip.

    • Peel tape and remove cable underneath.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Adrian Miranda

Membro da: 15/02/2018

677 Reputazione

5 Guide realizzate

Team

USF Tampa, Team S17-G5, Boczar Spring 2018 Membro di USF Tampa, Team S17-G5, Boczar Spring 2018

USFT-BOCZAR-S18S17G5

3 Membri

5 Guide realizzate

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 8

Ultimi 30 Giorni: 32

Tutti i Tempi: 247