Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Store

  1. Flip laptop over Remove 13 screws to remove bottom.  Size: Phillips #0
    • Flip laptop over

    • Remove 13 screws to remove bottom. Size: Phillips #0

    • Remove extra 3 screws from RAM port. Size: Phillips #0

  2. Disconnect keyboard and touchpad Remove CD drive
    • Disconnect keyboard and touchpad

    • Remove CD drive

  3. Flip laptop back over Using a plastic spudger, pry between the keyboard panel and bottom panel on all 4 sides.
    • Flip laptop back over

    • Using a plastic spudger, pry between the keyboard panel and bottom panel on all 4 sides.

  4. Remove 4 screws and tabs holding motherboard Be sure to disconnect fan tab on the bottom of the motherboard Be sure to disconnect fan tab on the bottom of the motherboard
    • Remove 4 screws and tabs holding motherboard

    • Be sure to disconnect fan tab on the bottom of the motherboard

  5. Remove 1 fan screw. Size: Phillips #0
    • Remove 1 fan screw. Size: Phillips #0

Conclusione

To reassemble your device, follow these instructions in reverse order.

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 13

Ultimi 30 Giorni: 39

Tutti i Tempi: 1,857