Parti

Nessuna parte richiesta.

Lay the computer down on its side as shown.
  • Lay the computer down on its side as shown.

  • Remove the two 14mm screws shown. The screws are loose enough to unscrew with your hands.

Aggiungi Commento

Gently slide the side panel straight back and remove from the computer.
  • Gently slide the side panel straight back and remove from the computer.

Aggiungi Commento

  • Unplug both sets of wires attaching the power supply unit to the motherboard.

  • The largest connection requires a significant amount of force to be removed.

Aggiungi Commento

  • Unplug all cords attached to the optical drive and hard drive.

Aggiungi Commento

  • Using the Phillips #2 driver, unscrew the four 8mm screws attaching the power supply unit to the outside of the computer.

Aggiungi Commento

  • Remove the power supply unit by pulling away from the screw side and then out.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 4 persone hanno completato questa guida.

Timothy Grebe

Membro da: 19/10/2014

1.319 Reputazione

9 Guide realizzate

Team

Cal Poly, Team 10-39, Amido Fall 2014 Membro di Cal Poly, Team 10-39, Amido Fall 2014

CPSU-AMIDO-F14S10G39

4 Membri

9 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 5

Ultimi 30 Giorni: 38

Tutti i Tempi: 2,099