Menü

Le tue impostazioni

Il mio banco da lavoro

Ottieni un rapido accesso alle guide, ai componenti e alle risposte per i tuoi dispositivi
Il Mio Carrello

Sembra che il tuo carrello sia vuoto

Sfoglia il Nostro Negozio

Lenovo IdeaCentre AIO 510S-23ISU Arm Stand Replacement

Scritto Da: Jackson Blake (e 2 altri collaboratori)
  • Commenti: 0
  • Preferiti: 0
  • Completamenti: 1

Difficoltà

Moderato

Passi

7

Tempo Necessario

5 - 15 minuti

Sezioni

3

Contrassegni

0

Introduzione

This requires a phillips head screwdriver only. Be sure to not drop the screws into the computer.

Strumenti

Acquista questi strumenti

Parti

Nessuna parte richiesta.

  1. Turn off the computer, unplug all cables, and let it cool down. Lay the computer flat on its screen.

    • Turn off the computer, unplug all cables, and let it cool down. Lay the computer flat on its screen.

    • Make sure that the work surface is flat and has nothing sharp on it.

    Traduci

  2. Remove the monitor stand screw in the bottom of the stand, and remove the stand completely. Remove the monitor stand screw in the bottom of the stand, and remove the stand completely.

    • Remove the monitor stand screw in the bottom of the stand, and remove the stand completely.

    Traduci

  3. Remove the two screws on the bottom of the computer, one on each side.

    • Remove the two screws on the bottom of the computer, one on each side.

    Traduci

  4. Spedizione gratuita per tutti gli ordini superiori a 100 US$ o contenenti un Kit Attrezzi Pro Tech!

    Sfoglia il Nostro Negozio

  5. Locate the slot on the right side of the computer next to the screw hole. Use a plastic opening tool or spudger to pry off the rear cover. (Don’t be afraid to use a little force.) Locate the slot on the right side of the computer next to the screw hole. Use a plastic opening tool or spudger to pry off the rear cover. (Don’t be afraid to use a little force.) Locate the slot on the right side of the computer next to the screw hole. Use a plastic opening tool or spudger to pry off the rear cover. (Don’t be afraid to use a little force.)

    • Locate the slot on the right side of the computer next to the screw hole. Use a plastic opening tool or spudger to pry off the rear cover. (Don’t be afraid to use a little force.)

    Traduci

  6. Once it has been separated, lift to remove. Once it has been separated, lift to remove.

    • Once it has been separated, lift to remove.

    Traduci

  7. Remove the four screws that secure the arm stand. Remove the four screws that secure the arm stand.

    • Remove the four screws that secure the arm stand.

    Traduci

  8. Lift up to remove the arm stand. Lift up to remove the arm stand.

    • Lift up to remove the arm stand.

    Traduci
Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Autore

con 2 altri collaboratori

Jackson Blake

Membro da: 22/01/2018

924 Reputazione

9 Guide realizzate

Distintivi: 8

+5 altri distintivi

Team

Cal Poly, Team S16-G3, Banghart Winter 2018 Membro di Cal Poly, Team S16-G3, Banghart Winter 2018

CPSU-BANGHART-W18S16G3

4 Membri

9 Guide realizzate

0 Commenti

Aggiungi un commento

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 15

Ultimi 30 Giorni: 49

Tutti i Tempi: 413