Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
At the top of the laptop you will see two switches, like in image one and two.
-
Pull the switches outwards with your thumb, towards the unlocked lock.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Once both switches are pulled, the battery should pop out.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Now you are ready to insert your new battery.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Use a JIS #1 screwdriver to remove the two 7 mm screws.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the back panel by sliding it away from the battery.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Use a JIS #1 screwdriver to remove the three 7 mm screws.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Wedge the plastic opening tool in-between the keyboard and the base of the laptop.
-
Continue using the plastic opening tool to pry around the edge until the keyboard is completely freed form the frame.
-
The keyboard should only be connected by a ribbon on the underside of the keyboard.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Use the tweezers to lift the black hinge on the ribbon connector.
-
Then pull the ribbon from the connector and remove the keyboard from the laptop.
-
Annulla: non ho completato questa guida.
Altre 2 persone hanno completato questa guida.