Aggiusta la tua roba Comunità Store

Lenovo Flex 3-1120 Speakers Replacement

Introduzione

If sound output is distorted, or no sound is coming from your speakers at all, then your speakers may need to be replaced.

Cosa ti serve

  1. Lenovo Flex 3-1120 Speakers Replacement, Bottom Panel: passo 1, immagine 1 di 1

    • Lay the computer down with the bottom panel facing up.

    Traduci

  2. Lenovo Flex 3-1120 Speakers Replacement: passo 2, immagine 1 di 2 Lenovo Flex 3-1120 Speakers Replacement: passo 2, immagine 2 di 2

    • Locate the ten 6mm Phillips screws along the edges and in the center of the back panel.

    • Remove all ten 6mm Phillips screws with a size 0 Phillips screwdriver.

    Traduci

  3. Lenovo Flex 3-1120 Speakers Replacement: passo 3, immagine 1 di 1

    • Wedge the plastic opening tool into the small space under the back panel.

    • Use the plastic opening tool as a lever to separate the bottom panel from the computer.

    • Slide the tool along the edges of the computer until the bottom panel is completely separated.

    • You may start prying the bottom panel on any edge.

    Traduci

  5. Lenovo Flex 3-1120 Speakers Replacement: passo 4, immagine 1 di 1

    • Lift the bottom panel off of the computer.

    Traduci

  6. Lenovo Flex 3-1120 Speakers Replacement, Speakers: passo 5, immagine 1 di 1

    • Locate the speakers at the bottom left and right corners of the computer.

    Traduci

  7. Lenovo Flex 3-1120 Speakers Replacement: passo 6, immagine 1 di 2 Lenovo Flex 3-1120 Speakers Replacement: passo 6, immagine 2 di 2

    • Locate the two 1mm Phillips head screws on both speakers.

    • Remove both screws from each speaker.

    Traduci

  8. Lenovo Flex 3-1120 Speakers Replacement: passo 7, immagine 1 di 2 Lenovo Flex 3-1120 Speakers Replacement: passo 7, immagine 2 di 2

    • Locate where the two speaker wires join at the center of the computer.

    • Follow the wires directly upward to where they connect into the motherboard.

    Traduci

  9. Lenovo Flex 3-1120 Speakers Replacement: passo 8, immagine 1 di 1

    • Using the spudger, pull the wire down and away from the motherboard to disconnect it.

    Traduci
Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

con 2 altri collaboratori

Geoff Bentz

Membro da: 03/09/16

934 Reputazione

5 Guide realizzate

Distintivi: 17

+14 altri distintivi

Team

UMass Dartmouth, Team 7-1, Catania Spring 2016 Membro di UMass Dartmouth, Team 7-1, Catania Spring 2016

UMASSD-CATANIA-S16S7G1

4 Membri

7 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 2

Ultimi 30 Giorni: 7

Tutti i Tempi: 402