Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Turn off the laptop.
-
Disconnect the charging cable.
-
Turn the computer upside down.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Locate the two switches that lock the battery.
-
Push the right switch outwards to unlock the battery.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Push and hold the left switch outwards to unlock the battery.
-
Pull the battery away from the computer.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Turn the laptop over so that the bottom side is facing up.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Unscrew the five 5mm Phillips #0 screws that hold the cover in place.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
With the screws removed, insert the plastic opening tool into the groove located on the right side.
-
Begin to pry up, and the plate should lift up from the body of the laptop.
-
While lifting up, take the piece in one hand and pull up and to the right to fully remove the back plate.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Carefully pull the fan's power connector from the laptop.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the three 5mm Phillips #1 screws holding the fan in place.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the fan by pulling it up and away from the computer.
-
Annulla: non ho completato questa guida.
Altre 2 persone hanno completato questa guida.