Introduzione

This guide will show you how to replace the screen on a Lenovo ThinkPad Edge E431 laptop.

  1. Remove the 2mm Phillips #00 screw from the battery cover. Lift the battery cover out of its slot.
    • Remove the 2mm Phillips #00 screw from the battery cover.

    • Lift the battery cover out of its slot.

  2. Disconnect the battery cable.
    • Disconnect the battery cable.

  3. Use the pointed end of a spudger to remove the two screw covers from the bottom corners of the display.
    • Use the pointed end of a spudger to remove the two screw covers from the bottom corners of the display.

  4. Spedizione gratuita per tutti gli ordini superiori a 100 US$ o contenenti un Kit Attrezzi Pro Tech!

    Sfoglia il Nostro Negozio
  5. Remove the two 2mm Phillips #00 screws found at the bottom corners of the display.
    • Remove the two 2mm Phillips #00 screws found at the bottom corners of the display.

  6. Separate the front bezel from the display using the plastic opening tool.
    • Separate the front bezel from the display using the plastic opening tool.

  7. Remove the four 2mm Phillips #00 screws from the screen.
    • Remove the four 2mm Phillips #00 screws from the screen.

  8. Lay the screen flat on top of the keyboard. Lay the screen flat on top of the keyboard.
    • Lay the screen flat on top of the keyboard.

  9. Peel up the adhesive tape to unlatch the metal retaining bracket on the display cable. Peel up the adhesive tape to unlatch the metal retaining bracket on the display cable.
    • Peel up the adhesive tape to unlatch the metal retaining bracket on the display cable.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 2 persone hanno completato questa guida.

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 6

Ultimi 30 Giorni: 35

Tutti i Tempi: 319