Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Componenti & Strumenti

Introduzione

This is a step by step guide on how to remove the fan assembly on the Lenovo Thinkpad Edge E431.

Parti

Nessuna parte specificata.

  1. Close the device and remove all power cables.
    • Close the device and remove all power cables.

    • Lay the laptop flat with the bottom facing upwards.

  2. Remove the four 2mm Phillips #00 screws from the bottom panel.
    • Remove the four 2mm Phillips #00 screws from the bottom panel.

  3. Nintendo Switch Kits

    A quick fix to get back in the game

    Shop Switch Kits

    Nintendo Switch Kits

    A quick fix to get back in the game

    Shop Switch Kits
  4. Remove the back panel of the device. Remove the back panel of the device.
    • Remove the back panel of the device.

  5. Remove the nine 2mm Phillips screws from the cooling assembly. Using the tweezers, remove the fan power cable from the motherboard. Using the tweezers, remove the fan power cable from the motherboard.
    • Remove the nine 2mm Phillips screws from the cooling assembly.

    • Using the tweezers, remove the fan power cable from the motherboard.

  6. Lift the fan assembly out of the laptop.
    • Lift the fan assembly out of the laptop.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Nathan Behan

Membro da: 14/02/2018

411 Reputazione

3 Guide realizzate

Team

USF Tampa, Team S3-G3, Nance Spring 2018 Membro di USF Tampa, Team S3-G3, Nance Spring 2018

USFT-NANCE-S18S3G3

4 Membri

6 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 5

Ultimi 30 Giorni: 21

Tutti i Tempi: 485