Salta al contenuto principale

Introduzione

USe this guide to replace the tripod socket.

Parti

Nessuna parte specificata.

  1. Carefully unscrew the four (4) screws on the bottom of the camera. Make sure you don't miss the one that's actually in the tripod socket hole.
    • Carefully unscrew the four (4) screws on the bottom of the camera.

    • Make sure you don't miss the one that's actually in the tripod socket hole.

  2. Open the back door on the camera by pushing down on the door latch.
    • Open the back door on the camera by pushing down on the door latch.

  3. Apply pressure to the bottom plate and it will pop off.
    • Apply pressure to the bottom plate and it will pop off.

    • From here, you can replace the bottom plate, or continue on to further steps.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Zachary

Membro da: 12/04/2011

34 Reputazione

2 Guide realizzate

Team

Cal Poly, Team 18-19, Garner Spring 2011 Membro di Cal Poly, Team 18-19, Garner Spring 2011

CPSU-GARNER-S11S18G19

4 Membri

5 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 3

Ultimi 30 Giorni: 4

Tutti i Tempi: 2,183