Aggiusta le tue cose Community Store

Leica CS20 Screen Replacement

Introduzione

The controller screen has been crashed during the work at construction site. I didn't want to pay 1200 EUR to Leica service center.

  1. Leica CS20 Screen Replacement, Oops..: passo 1, immagine 1 di 1

    • I did it again!

    Modifica

  2. Leica CS20 Screen Replacement, Order a new replacement screen: passo 2, immagine 1 di 1

    • I am tired to pay 1200 EUR to Leica service center, so I ordered a new replacement screent here: www.xsurveying.com/product/new-leica-cs20-digitizer-screen-replacement Price with delivery was around 185 EUR

    Modifica

  3. Leica CS20 Screen Replacement, New touchscreen: passo 3, immagine 1 di 1

    • The package arrived in two weeks. It contained a well packed touchscreen

    Modifica

  4. Leica CS20 Screen Replacement, Prepare a clean area: passo 4, immagine 1 di 1

    • Place controller on a desk

    Modifica

  5. Leica CS20 Screen Replacement, Unscrew all the bolts: passo 5, immagine 1 di 1

    • …and unscrew all the bolts

    Modifica

  6. Leica CS20 Screen Replacement, Remove the bottom lid: passo 6, immagine 1 di 1

    • Also, remove the bottom plastic lid

    Modifica

  7. Leica CS20 Screen Replacement, Unscrew two black bolts: passo 7, immagine 1 di 1

    • …in order to unscrew these two black bolts. Place them separately.

    Modifica

  8. Leica CS20 Screen Replacement, Unscrew 2 bolts: passo 8, immagine 1 di 1

    • These bolts also should be unscrewed.

    Modifica

  10. Leica CS20 Screen Replacement, Remove the back cover: passo 9, immagine 1 di 1

    • After that the controller’s back wall can be removed

    Modifica

  11. Leica CS20 Screen Replacement, Unscrew four bolts: passo 10, immagine 1 di 1

    • Unscrew these four bolts

    Modifica

  12. Leica CS20 Screen Replacement, Unscrew two bolts: passo 11, immagine 1 di 1

    • Unscrew these two small bolts. Place them separately.

    Modifica

  13. Leica CS20 Screen Replacement, Unscrew two plastic bolts: passo 12, immagine 1 di 1

    • Unscrew these two plastic bolts. Place them separately.

    Modifica

  14. Leica CS20 Screen Replacement, Unscrew two bolts: passo 13, immagine 1 di 1

    • Now the last two bolts can be unscrewed

    Modifica

  15. Leica CS20 Screen Replacement, Remove the cage: passo 14, immagine 1 di 1

    • This GNSS antenna connector will be disconnected when you pull out the metal cage

    Modifica

  16. Leica CS20 Screen Replacement, Pull out the board: passo 15, immagine 1 di 1

    • …than pull out this board carefully

    Modifica

  17. Leica CS20 Screen Replacement, See theribbon cable: passo 16, immagine 1 di 1

    • So you wil get an access to this ribbon cable

    Modifica

  18. Leica CS20 Screen Replacement, Unclip the connector: passo 17, immagine 1 di 1

    • ...unclip it!

    Modifica

  19. Leica CS20 Screen Replacement, Unclip the connector: passo 18, immagine 1 di 1

    • Also, unclip the kyocera-connector to this ribbon cable

    Modifica

  20. Leica CS20 Screen Replacement, Act carefully!: passo 19, immagine 1 di 1

    • Proceed with great caution!

    Modifica

  21. Leica CS20 Screen Replacement, Unclip the cable: passo 20, immagine 1 di 1

    • Unclip the touchscreen ribbon cable

    Modifica

  22. Leica CS20 Screen Replacement, Remove the whole board: passo 21, immagine 1 di 1

    • Now you are able to remove the whole board…

    Modifica

  23. Leica CS20 Screen Replacement, Change the screen!: passo 22, immagine 1 di 1

    • And finally, change the screen!

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

Documenti Allegati

Autore

con 1 altro collaboratore

Sandu Tuzarean

Membro da: 04/01/25

345 Reputazione

1 Guida realizzata

Distintivi: 2

0Commenti sulla guida

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 15

Ultimi 30 Giorni: 51

Tutti i Tempi: 206