Aggiusta la tua roba Comunità Store

Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.

LeapFrog LeapPad2 Explorer Back Cover Replacement

Introduzione

Whether your child has cracked the back cover or decided to cover it in make-up, learn how to replace the back cover.

Cosa ti serve

  1. LeapFrog LeapPad2 Explorer Back Cover Replacement, Battery: passo 1, immagine 1 di 2 LeapFrog LeapPad2 Explorer Back Cover Replacement, Battery: passo 1, immagine 2 di 2

    • Before disassembling your LeapPad, ensure your device is shut off.

    • Push outward on the plastic side panels to remove and reveal battery.

    • The panels should detach fully from the main device.

    Traduci

  2. LeapFrog LeapPad2 Explorer Back Cover Replacement: passo 2, immagine 1 di 3 LeapFrog LeapPad2 Explorer Back Cover Replacement: passo 2, immagine 2 di 3 LeapFrog LeapPad2 Explorer Back Cover Replacement: passo 2, immagine 3 di 3

    • Push down from the positive end of the battery towards the negative end to pry the battery up out of its dispenser.

    • Remove all four AA alkaline batteries from the device.

    Traduci

  4. LeapFrog LeapPad2 Explorer Back Cover Replacement, Back Cover: passo 3, immagine 1 di 2 LeapFrog LeapPad2 Explorer Back Cover Replacement, Back Cover: passo 3, immagine 2 di 2

    • This step will void your device warranty.

    • Remove the following screws securing the back cover to the main device:

    • Two 10.0 mm Phillips screws

    • Four 4.0 mm Phillips screws

    • Three 3.0 mm Phillips screws

    Traduci

  5. LeapFrog LeapPad2 Explorer Back Cover Replacement: passo 4, immagine 1 di 3 LeapFrog LeapPad2 Explorer Back Cover Replacement: passo 4, immagine 2 di 3 LeapFrog LeapPad2 Explorer Back Cover Replacement: passo 4, immagine 3 di 3

    • Insert a plastic opening tool into the seam between the front and rear covers to detach the back cover from the rest of the device.

    • Move the plastic opening tool around the perimeter of the LeapPad2.

    • Lift up and remove the rear case from the tablet.

    • A butter knife can help when prying the device.

    Traduci
Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

con 5 altri collaboratori

Nupur Garg

Membro da: 04/12/14

867 Reputazione

7 Guide realizzate

Distintivi: 12

+9 altri distintivi

Team

Cal Poly, Team 8-10, Regan Spring 2014 Membro di Cal Poly, Team 8-10, Regan Spring 2014

CPSU-REGAN-S14S8G10

4 Membri

16 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 4

Tutti i Tempi: 1,409