Salta al contenuto principale

Lasko 4910 Filter Replacement

Cosa ti serve

  1. Lasko 4910 Filter Replacement, Filter: passo 1, immagine 1 di 1
    • On the backside of the fan, remove the top two 4mm Phillips #Y1 screws using PH 1 bit and Magnetic Driver

  2. Lasko 4910 Filter Replacement: passo 2, immagine 1 di 1
    • Remove the top plastic portion of the fan

  3. Lasko 4910 Filter Replacement: passo 3, immagine 1 di 1
    • Remove all four 4mm screws using the Phillips #1 screwdriver.

  4. Lasko 4910 Filter Replacement: passo 4, immagine 1 di 1
    • Remove the filter from the fan.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Julie Ling

Membro da: 10/22/18

159 Reputazione

1 Guida realizzata

Team

UC Davis, Team S11-G2, Lore Fall 2018 Membro di UC Davis, Team S11-G2, Lore Fall 2018

UCD-LORE-F18S11G2

4 Membri

1 Guida realizzata

Un commento

Thank you for taking the time to do this. A great little guide for a fan that doesn't have a lot of support. Most details are looked over in online guide material. But this one was done with professional care.

Sincerely,

Davis Steffens

Seattle, WA

davissteffens@hotmail.com

PS: I Fix-It represents more than a company providing a service. I think you are reminding everyone that we have the right to Fix. Which in these weird times is a step needed.

Davis Steffens - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 2

Ultimi 7 Giorni: 5

Ultimi 30 Giorni: 17

Tutti i Tempi: 1,490