Aggiusta la tua roba Comunità Store

LaCie Rugged USB-C Circuit Board Replacement

Cosa ti serve

  1. LaCie Rugged USB-C Circuit Board Replacement, Overview: passo 1, immagine 1 di 3 LaCie Rugged USB-C Circuit Board Replacement, Overview: passo 1, immagine 2 di 3 LaCie Rugged USB-C Circuit Board Replacement, Overview: passo 1, immagine 3 di 3

    • This guide contains steps for the LaCie Rugged USB-C. There is no guarantee that the steps will be the same for different models.

    Modifica

  2. LaCie Rugged USB-C Circuit Board Replacement, Case Removal: passo 2, immagine 1 di 2 LaCie Rugged USB-C Circuit Board Replacement, Case Removal: passo 2, immagine 2 di 2

    • Remove the rubber case around the drive. You can just stretch it off.

    Modifica

  3. LaCie Rugged USB-C Circuit Board Replacement, Case Screws: passo 3, immagine 1 di 2 LaCie Rugged USB-C Circuit Board Replacement, Case Screws: passo 3, immagine 2 di 2

    • Remove these 4x Torx T8 screws

    Modifica

  5. LaCie Rugged USB-C Circuit Board Replacement, Case Removal: passo 4, immagine 1 di 2 LaCie Rugged USB-C Circuit Board Replacement, Case Removal: passo 4, immagine 2 di 2

    • Push on one side of the drive, where the white plastic is. Which side does not matter.

    Modifica

  6. LaCie Rugged USB-C Circuit Board Replacement, Preparing for Drive Removal: passo 5, immagine 1 di 2 LaCie Rugged USB-C Circuit Board Replacement, Preparing for Drive Removal: passo 5, immagine 2 di 2

    • Push GENTLY on the back side of the hard drive.

    • DO NOT push more than is necessary to get the drive above the white plastic, as shown in the second picture.

    Modifica

  7. LaCie Rugged USB-C Circuit Board Replacement, Drive Removal: passo 6, immagine 1 di 1

    • Pull the drive gently out of the SATA connector.

    Modifica

  8. LaCie Rugged USB-C Circuit Board Replacement, Screw Removal: passo 7, immagine 1 di 1

    • Remove this Phillips 00 screw from the board.

    Modifica

  9. LaCie Rugged USB-C Circuit Board Replacement, Board Removal: passo 8, immagine 1 di 1

    • Slide the board out, making sure to keep any foam pieces intact.

    • Do not let any foam pieces get damaged. They are important.

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 5 persone hanno completato questa guida.

Autore

con 1 altro collaboratore

9021007

Membro da: 07/13/18

4.599 Reputazione

25 Guide realizzate

Distintivi: 22

+19 altri distintivi

3 Commenti

Where can i get a new board? thank you

Bar Avraham - Replica

Yes, where can we find a new board?

Vassilis Trigkas - Replica

Right, where can the part be purchased?????

James Causey - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 5

Ultimi 7 Giorni: 12

Ultimi 30 Giorni: 51

Tutti i Tempi: 1,402