Introduzione

Replacing the speaker.

  1. Turn the closed phone so that the back panel is facing you.
    • Turn the closed phone so that the back panel is facing you.

    • Press down and forward firmly on the gray tab in the middle of the phone.

  2. Now just lift up on the battery and remove it from the phone. Now just lift up on the battery and remove it from the phone.
    • Now just lift up on the battery and remove it from the phone.

  3. Remove the rubber grommet using a Spudger.
    • Remove the rubber grommet using a Spudger.

  4. Spedizione gratuita per tutti gli ordini superiori a 100 US$ o contenenti un Kit Attrezzi Pro Tech!

    Sfoglia il Nostro Negozio
  5. Be sure not to lose the screws. They are small!
    • Be sure not to lose the screws. They are small!

    • Remove the five screws using a Phillips #00 Screwdriver.

  6. When removing back cover, be careful not to break the speaker wires. Using an iPod Opening Tool, carefully pry off the back cover. Using Tweezers, gently pull speaker wires out.
    • When removing back cover, be careful not to break the speaker wires.

    • Using an iPod Opening Tool, carefully pry off the back cover.

    • Using Tweezers, gently pull speaker wires out.

  7. Separate the two halves.
    • Separate the two halves.

  8. Take top half of phone and pry up speaker using the Spudger. Take top half of phone and pry up speaker using the Spudger.
    • Take top half of phone and pry up speaker using the Spudger.

  9. Lift out speaker.
    • Lift out speaker.

Conclusione

To reassemble your device, follow these instructions in reverse order.

David Foster

Membro da: 11/04/2010

1 Reputazione

8 Guide realizzate

Team

Cal Poly, Team 25-88, Amido Spring 2010 Membro di Cal Poly, Team 25-88, Amido Spring 2010

CPSU-AMIDO-S10S25G88

4 Membri

18 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 1

Tutti i Tempi: 1,878