Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.
Introduzione
This guide will remove the digitizer and mother board from the display screen, allowing it to be replaced.
Cosa ti serve
-
-
Pull off the back cover from the phone using the groove on the bottom right side.
-
-
-
-
Remove all 9 of the 3mm Phillips #000 screws from the digitizer.
-
Work your way around the edge of the phone, gently prying the digitizer off the phone.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annulla: non ho completato questa guida.
Altre 4 persone hanno completato questa guida.