Introduzione

This guide will explain how to replace the Auxiliary Port (headphone jack) on the LG Treasure.

Parti

Nessuna parte richiesta.

  1. Make sure the LG Treasure is turned off. Pull off the back cover from the phone using the groove on the bottom right side.
    • Make sure the LG Treasure is turned off.

    • Pull off the back cover from the phone using the groove on the bottom right side.

  2. Remove the battery from the phone by lifting up on the bottom end of the battery.
    • Remove the battery from the phone by lifting up on the bottom end of the battery.

  3. Spedizione gratuita per tutti gli ordini superiori a 100 US$ o contenenti un Kit Attrezzi Pro Tech!

    Sfoglia il Nostro Negozio
  4. Remove all 9 of the 3mm Phillips #000 screws from the digitizer. Work your way around the edge of the phone, gently prying the digitizer off the phone.
    • Remove all 9 of the 3mm Phillips #000 screws from the digitizer.

    • Work your way around the edge of the phone, gently prying the digitizer off the phone.

  5. Insert your finger nail into the groove under the Auxiliary Port and pry the Auxiliary Port out. Insert your finger nail into the groove under the Auxiliary Port and pry the Auxiliary Port out. Insert your finger nail into the groove under the Auxiliary Port and pry the Auxiliary Port out.
    • Insert your finger nail into the groove under the Auxiliary Port and pry the Auxiliary Port out.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Team

UW Stout, Team S8-G5, Ogden Spring 2018 Membro di UW Stout, Team S8-G5, Ogden Spring 2018

UWSTOUT-OGDEN-S18S8G5

3 Membri

5 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 2

Ultimi 30 Giorni: 7

Tutti i Tempi: 104