Salta al contenuto principale

Introduzione

The following guide explains how to replace the charger port.

  1. Remove back cover. Remove the battery and simcard.
    • Remove back cover.

    • Remove the battery and simcard.

  2. Remove the 12 screws (with the phillips head 000) around frame and near sim and sd cards.
    • Remove the 12 screws (with the phillips head 000) around frame and near sim and sd cards.

  3. Kit riparazione batterie MacBook

    A partire da $69.99

    Buy Now

    Kit riparazione batterie MacBook

    A partire da $69.99

    Buy Now
  4. Remove bottom plate where the charger port is located.
    • Remove bottom plate where the charger port is located.

  5. Remove the back piece. Remove the back piece.
    • Remove the back piece.

  6. Using soldering iron, loosen the charger port from the bottom of the device.
    • Using soldering iron, loosen the charger port from the bottom of the device.

  7. Using a smudger, lift the charger port and replace as necessary.
    • Using a smudger, lift the charger port and replace as necessary.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Bruna

Membro da: 08/10/2014

527 Reputazione

4 Guide realizzate

Team

USF Tampa, Team 9-1, Leahy Fall 2014 Membro di USF Tampa, Team 9-1, Leahy Fall 2014

USFT-LEAHY-F14S9G1

3 Membri

5 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 1

Tutti i Tempi: 2,783