Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the 2 screws holding the back cover using a T5 screwdriver.
-
Use a guitar pick or a plastic opening tool to free the clips on the top and each side of the back cover.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Use an opening pick to pry off the rear case.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the tape over the battery, the screws and the antenna connector cord.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the the screws securing the battery cable connector.
-
Disconnect the battery cable.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
The battery is held down by some adhesive.
-
Carefully heat the battery to loosen the adhesive holding it to the case.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
The battery is removed.
-
Replace the battery with a new one.
-
Annulla: non ho completato questa guida.
Altre 7 persone hanno completato questa guida.
5 Commenti
I’m not using a heat gun, it´s a hairdryer; on this case the hairdryer hardly exceeds the 60°C and that is enough to remove the battery. If you want to buy a heat gun you must be careful not to use more than 50 °
you can search it on Amazon and buy directly from LG.
Thank you so much for this wonderful article it helped me replace my battery. I bought my replacement battery from here:-