Parti

Nessuna parte richiesta.

Slide the battery cover release towards top of phone.
  • Slide the battery cover release towards top of phone.

  • Place one finger at each side of the battery cover.

  • Lift and remove the battery cover.

Aggiungi Commento

Place a finger at the top corner of the battery and lift out of the phone.
  • Place a finger at the top corner of the battery and lift out of the phone.

Aggiungi Commento

  • Use the spudger to lift up the two screw covers at the top of the phone.

  • Remove all four Phillips#00 (3.3mm) screws with screwdriver.

Aggiungi Commento

  • Use the spudger to lift up the rear case from the phone.

  • Note: Rear case is connected on all sides and will have to be detached on all sides before removal.

  • Remove the rear case from the device.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Matthew Cataldo

Membro da: 23/01/2012

1 Reputazione

2 Guide realizzate

Team

Cal Poly, Team 3-29, Amido Winter 2012 Membro di Cal Poly, Team 3-29, Amido Winter 2012

CPSU-AMIDO-W12S3G29

4 Membri

14 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 495