Salta al contenuto principale

Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.

LG L1200 Logic Board Replacement

Cosa ti serve

  1. LG L1200 Logic Board Replacement, Logic Board: passo 1, immagine 1 di 1
    • Make sure you remove the battery by lifting the tab on the back of the phone before opening the case.

    • Poke out rubber covers using a spudger or pointy object, such as a thumb tack.

  2. LG L1200 Logic Board Replacement: passo 2, immagine 1 di 1
    • Use a T6 torx screwdriver to unscrew the 6 screws that hold the back casing on.

  3. LG L1200 Logic Board Replacement: passo 3, immagine 1 di 1
    • Use IPod opening tool to separate back housing.

    • There are two tabs located on either side of the phone.

  4. LG L1200 Logic Board Replacement: passo 4, immagine 1 di 1
    • Separate the back housing from the phone.

    • Be careful not to rip out the wire (highlighted in yellow) when separating the back housing.

  5. LG L1200 Logic Board Replacement: passo 5, immagine 1 di 1
    • Use a spudger to disconnect antenna wire.

  6. LG L1200 Logic Board Replacement: passo 6, immagine 1 di 1
    • Use the IPod opening tool to pop out the logic board.

  7. LG L1200 Logic Board Replacement: passo 7, immagine 1 di 1
    • Use the IPod opening tool to disconnect the main ribbon.

  8. LG L1200 Logic Board Replacement: passo 8, immagine 1 di 1
    • Once the ribbon is detached, remove the logic board and replace if necessary.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Team

Cal Poly, Team 6-14, Maness Spring 2010 Membro di Cal Poly, Team 6-14, Maness Spring 2010

CPSU-MANESS-S10S6G14

4 Membri

16 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 1,209