Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Flip open the phone and locate the four screw covers.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove all four screw covers by using an IPod opening tool. They should come off relatively easy.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Using a T6 Torx screwdriver, remove all four screws.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Once the screws are removed, use an IPod opening tool to separate the front cover from the inner screen cover.
-
Run the Ipod opening tool down both sides,disconnecting the tabs that hold the covers together.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Pull the inner screen cover towards you and up in order to separate it from the front cover.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the tape from the bottom of the LCD screen.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Carefully lift the LCD screen and peel it from the gold ribbon. The sticky connection runs all the way around the LCD screen.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Flip the screen over so that you can see the outer LCD screen and the circuit board.
-
Insert spudger in the bottom right corner.
-
Lift up and move the spudger across the bottom.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Use the pointy side of the spudger to peel off the interior tape.
-
Flip the assembly over and peel the circuit board from the screen.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Use the spudger to remove the LCD screen from its backing.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Desolder the wires connecting the speaker.
-
Solder on wires from new speaker.
-