Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Power off your Phone before beginning disassembly.
-
Use the 'Jimmy' and 'Metal Spudger' to slowly pry open the outsides of the back case.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the thirteen 3.4 mm Phillips #00 screws securing the midframe to the display assembly.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Use a metal spudger or plastic opening tool to pry open the outer cover.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Use the flat end of a spudger to detach the battery connector from the logic board.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Use a spudger to pry the battery from the phone.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Use a spudger to carefully disconnect the front camera connector.
-
Use a spudger to disconnect the display cable connector.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the motherboard assembly from the display assembly with the a spudger or hand.
-
Annulla: non ho completato questa guida.
Altre 4 persone hanno completato questa guida.