Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Turn the device so the two bottom screws are shown.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the two 7mm screws holding the back panel of the phone using the P5 bit and magnetic driver.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Carefully use the plastic opening tool to pry the back panel of the phone from the front screen. This will expose the battery and other parts.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Use the Phillips #0 screwdriver to remove the 5mm screw holding the metal bracket that protects the battery's ribbon cable.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Carefully use the plastic opening tool to pry the ribbon cable connecting the battery to the motherboard of the phone.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Gently raise the battery from its compartment.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the thirteen 5mm screws holding the plastic shield covering the motherboard using the Phillips #00 screwdriver.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Carefully use the plastic opening tool to pry the plastic shield from the motherboard. This will expose the motherboard and ribbon cables for each component.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Carefully use the plastic opening tool to pry the ribbon cable below the camera itself from the motherboard.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Using the ribbon beneath the camera lift it upwards and pull the camera out.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Carefully use the plastic opening tool to pry the ribbon cable connecting the battery to the motherboard of the phone.
-
Slowly pull the ribbon cable upward releasing the volume buttons from the phone.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Carefully use the plastic opening tool to pry the ribbon cable below the volume buttons on the left side of the phone.
-
Carefully use the plastic opening tool to pry the ribbon cable to the left of the camera.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Carefully use the plastic opening tool to pry the wire that connects to the bottom home and back display buttons.
-
Carefully use the plastic opening tool to pry the second wire on the right side of the battery that also connects to the bottom home and back display buttons.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Carefully use the plastic opening tool to pry the motherboard from the front screen.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the 5mm Phillips #00 screw below the volume buttons holding the plastic shield onto the screen display.
-
Remove the 5mm Phillips #00 screw on the top right of the phone.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Carefully pull the ribbon cable upward and away from the front screen display.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Carefully use the plastic opening tool to pry the screen protector from the display and motherboard.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Slowly separate the front screen from the screen protector. This will remove the screen protector from the phone.
-