Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Store

  1. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    Turn the device so the two bottom screws are shown.
    • Turn the device so the two bottom screws are shown.

  2. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    Remove the two 7mm screws holding the back panel of the phone using the P5 bit and magnetic driver.
    • Remove the two 7mm screws holding the back panel of the phone using the P5 bit and magnetic driver.

  3. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    Carefully use the plastic opening tool to pry the back panel of the phone from the front screen. This will expose the battery and other parts.
    • Carefully use the plastic opening tool to pry the back panel of the phone from the front screen. This will expose the battery and other parts.

  4. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    Use the Phillips #0 screwdriver to remove the 5mm screw holding the metal bracket that protects the battery's ribbon cable.
    • Use the Phillips #0 screwdriver to remove the 5mm screw holding the metal bracket that protects the battery's ribbon cable.

  5. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    Carefully use the plastic opening tool to pry the ribbon cable connecting the battery to the motherboard of the phone.
    • Carefully use the plastic opening tool to pry the ribbon cable connecting the battery to the motherboard of the phone.

  6. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    Gently raise the battery from its compartment. Gently raise the battery from its compartment.
    • Gently raise the battery from its compartment.

  7. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    Remove the thirteen 5mm screws holding the plastic shield covering the motherboard using the Phillips #00 screwdriver.
    • Remove the thirteen 5mm screws holding the plastic shield covering the motherboard using the Phillips #00 screwdriver.

  8. SKIP THE UPGRADE

    Save by fixing with an all-in-one kit.

    Shop iPhone Fix Kits

    SKIP THE UPGRADE

    Save by fixing with an all-in-one kit.

    Shop iPhone Fix Kits
  9. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    Carefully use the plastic opening tool to pry the plastic shield from the motherboard. This will expose the motherboard and ribbon cables for each component.
    • Carefully use the plastic opening tool to pry the plastic shield from the motherboard. This will expose the motherboard and ribbon cables for each component.

  10. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    Carefully use the plastic opening tool to pry the ribbon cable below the camera itself from the motherboard.
    • Carefully use the plastic opening tool to pry the ribbon cable below the camera itself from the motherboard.

  11. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    Using the ribbon beneath the camera lift it upwards and pull the camera out.
    • Using the ribbon beneath the camera lift it upwards and pull the camera out.

  12. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    Carefully use the plastic opening tool to pry the ribbon cable connecting the battery to the motherboard of the phone. Slowly pull the ribbon cable upward releasing the volume buttons from the phone.
    • Carefully use the plastic opening tool to pry the ribbon cable connecting the battery to the motherboard of the phone.

    • Slowly pull the ribbon cable upward releasing the volume buttons from the phone.

  13. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    Carefully use the plastic opening tool to pry the ribbon cable below the volume buttons on the left side of the phone. Carefully use the plastic opening tool to pry the ribbon cable to the left of the camera.
    • Carefully use the plastic opening tool to pry the ribbon cable below the volume buttons on the left side of the phone.

    • Carefully use the plastic opening tool to pry the ribbon cable to the left of the camera.

  14. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    Carefully use the plastic opening tool to pry the wire that connects to the bottom home and back display buttons. Carefully use the plastic opening tool to pry the second wire on the right side of the battery that also connects to the bottom home and back display buttons.
    • Carefully use the plastic opening tool to pry the wire that connects to the bottom home and back display buttons.

    • Carefully use the plastic opening tool to pry the second wire on the right side of the battery that also connects to the bottom home and back display buttons.

  15. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    Carefully use the plastic opening tool to pry the motherboard from the front screen.
    • Carefully use the plastic opening tool to pry the motherboard from the front screen.

  16. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    Remove the 5mm Phillips #00 screw below the volume buttons holding the plastic shield onto the screen display. Remove the 5mm Phillips #00 screw on the top right of the phone.
    • Remove the 5mm Phillips #00 screw below the volume buttons holding the plastic shield onto the screen display.

    • Remove the 5mm Phillips #00 screw on the top right of the phone.

  17. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    Carefully pull the ribbon cable upward and away from the front screen display.
    • Carefully pull the ribbon cable upward and away from the front screen display.

  18. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    Carefully use the plastic opening tool to pry the screen protector from the display and motherboard.
    • Carefully use the plastic opening tool to pry the screen protector from the display and motherboard.

  19. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    Slowly separate the front screen from the screen protector. This will remove the screen protector from the phone. Slowly separate the front screen from the screen protector. This will remove the screen protector from the phone.
    • Slowly separate the front screen from the screen protector. This will remove the screen protector from the phone.

  20. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    Slowly separate the power button from the screen display. This will release the power button.
    • Slowly separate the power button from the screen display. This will release the power button.

Linea Traguardo

Team

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 2

Tutti i Tempi: 161