Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Componenti & Strumenti

Introduzione

If your battery fails or is not holding its charge, use this guide to replace your battery.

  1. Turn the device so the two bottom screws are shown.
    • Turn the device so the two bottom screws are shown.

  2. Remove the two 7mm screws holding the back panel of the phone using the P5 bit and magnetic driver.
    • Remove the two 7mm screws holding the back panel of the phone using the P5 bit and magnetic driver.

  3. Kit per Nintendo Switch

    A quick fix to get back in the game

    Shop Switch Kits

    Kit per Nintendo Switch

    A quick fix to get back in the game

    Shop Switch Kits
  4. Carefully use the plastic opening tool to pry the back panel of the phone from the front screen. This will expose the battery and other parts.
    • Carefully use the plastic opening tool to pry the back panel of the phone from the front screen. This will expose the battery and other parts.

  5. Use the Phillips #0 screwdriver to remove the 5mm screw holding the metal bracket that protects the battery's ribbon cable.
    • Use the Phillips #0 screwdriver to remove the 5mm screw holding the metal bracket that protects the battery's ribbon cable.

  6. Carefully use the plastic opening tool to pry the ribbon cable connecting the battery to the motherboard of the phone.
    • Carefully use the plastic opening tool to pry the ribbon cable connecting the battery to the motherboard of the phone.

  7. Gently raise the battery from its compartment. Gently raise the battery from its compartment.
    • Gently raise the battery from its compartment.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Team

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 2

Tutti i Tempi: 126