Salta al contenuto principale

Introduzione

Use this guide to remove or replace the back cover of the LG G3 (B855).

  1. Power off your phone before beginning disassembly. Insert a thumbnail, or a prying tool like a spudger, into the notch at the bottom left of the back cover.
    • Power off your phone before beginning disassembly.

    • Insert a thumbnail, or a prying tool like a spudger, into the notch at the bottom left of the back cover.

    • Pry the back cover up to separate its plastic clips.

  2. Lift the back cover to release the rest of the plastic clips and remove it. In case you can't lift the back cover completely, slide your fingernail or you prying tool around the midframe to release the remaining clips.
    • Lift the back cover to release the rest of the plastic clips and remove it.

    • In case you can't lift the back cover completely, slide your fingernail or you prying tool around the midframe to release the remaining clips.

    • Remove the back cover.

    • To reinstall the back cover press it firmly into place until you hear a snap from the plastic clips to form a seamless connection with the rear side of the phone.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 4 persone hanno completato questa guida.

Dominik Schnabelrauch

Membro da: 23/11/2016

44.235 Reputazione

223 Guide realizzate

Team

iFixit Membro di iFixit

Community

104 Membri

9.248 Guide realizzate

Really. Was this necessary

James Beam - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 2

Ultimi 30 Giorni: 23

Tutti i Tempi: 3,748