Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the cover of the SD card. Find it on the right side of the back of the tablet.
-
Press the SD card in to make it pop out.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Slide the stylus out from the bottom left corner of the back panel.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Start at a corner and pry the screen up with a plastic opening tool.
-
Slide the tool in the seam at the edge of the screen.
-
Wedge additional plastic opening tools in the seam to help lift the screen.
-
Slide both wedged plastic opening tools towards the bottom to pop the screen loose.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
With a Phillips #000 screwdriver, unscrew the six 4.0 mm screws that hold down the battery.
-
With the Phillips #000 screwdriver, unscrew the two 4.0 mm screws that hold down the battery ribbon connector.
-
Use a magnetic mat to keep track of these tiny screws for later reassembly.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Lift the battery ribbon connector with your finger.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Lift the battery with your fingers and remove it from the device.
-
Annulla: non ho completato questa guida.
Un'altra persona ha completato questa guida.
2 Commenti
This looks to be a helpful Guide, but there is no help in WHERE to purchase a battery and if there could be a different battery with higher capacity and a longer life as a choice. As a Consumer, this type of information would be helpful.
I cannot get a wedge tool in to remove the screen on my LG G Pad X 10.1. Any suggestions?