Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
With the tablet face down, pull the SD card slot cover out.
-
Using a Phillips #000 screwdriver, remove the 3mm screw located in the SD card slot.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Insert a plastic opening tool in the small crevasse between the screen and the back panel.
-
Pry the screen away from the back panel.
-
Repeat this on each edge of the device.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
After using the plastic opening tools, pry the device open with your hands.
-
Remove the back panel from the screen.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
Attrezzo utilizzato in questo passaggio:Magnetic Project Mat$19.95-
Remove the four 3 mm Phillips #000 screws that are attached to the speaker.
-
Annulla: non ho completato questa guida.
Altre 4 persone hanno completato questa guida.