Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
With the tablet face down, pull the SD card slot cover out.
-
Using a Phillips #000 screwdriver, remove the 3mm screw located in the SD card slot.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Insert a plastic opening tool in the small crevasse between the screen and the back panel.
-
Pry the screen away from the back panel.
-
Repeat this on each edge of the device.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
After using the plastic opening tools, pry the device open with your hands.
-
Remove the back panel from the screen.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
Attrezzo utilizzato in questo passaggio:Magnetic Project Mat$19.95-
Remove the four 3 mm Phillips #000 screws that are attached to the speaker.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the 3mm Phillips #000 screws from the corners of the battery.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Using a spudger or a plastic opening tool, disconnect the ribbon cable from the right side of the device.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Using the Phillips #000 screwdriver, remove the two 3mm screws located at the bottom of the ribbon cable.
-
Remove the ribbon cable from the device.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Unhook the battery from the top of the device.
-
Annulla: non ho completato questa guida.
Altre 18 persone hanno completato questa guida.
9 Commenti
Every teardown I can find on this tablet has that darn screw in the sd card slot, but mine does not!! Does ANYBODY have teardown for mine? I can send pics, it's Verizon Gpad 8.3 LTE, slot holds sd and sim but NO screw. Son spilled water on it so screen is all dark and haptic stays on, I'd like to attempt the rice trick if I can open it.
The other models have a sponge adhesive on the back of the battery.
Completely disregard the first screw.
Wesley - Me too. I have no idea why Android released two different models with the same freaking model name. I thought they had more common sense than that. If anyone has the teardown for the new model, holler.
sorry this teardown is not for the 8.3