Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.
Introduzione
The circuit board and full key board are attached and must be installed together as one unit. Do not try to separate them.
Cosa ti serve
-
-
Place the phone so the screen side is facing down.
-
Locate the latch at the end of the phone, opposite of the camera.
-
-
-
-
Remove the 5 screw covers on the back of the phone using a Push Pin.
-
Quasi finito!
To reassemble your device, follow these instructions in reverse order.
Conclusione
To reassemble your device, follow these instructions in reverse order.