Introduzione

Rear case replacement will only require the removal of the battery and six screws, but prying the case loose may take a few minutes.

Parti

Nessuna parte richiesta.

  1. Insert the plastic opener into the slot at the top of the device.
    • Insert the plastic opener into the slot at the top of the device.

    • Apply gentle pressure with the plastic tool to pop the back case off.

    Aggiungi Commento

  2. Use the plastic opener to lift, and remove, the device battery.
    • Use the plastic opener to lift, and remove, the device battery.

    Aggiungi Commento

  3. GIVE TOOLS. FIX FOREVER.

    GIVE TOOLS.

    FIX FOREVER.

    Spread the Fixmas cheer.

    GIVE TOOLS. FIX FOREVER.

    Spread the Fixmas cheer.

    • Use a screwdriver and corresponding bit to remove the six 2mm screws that are located along the edge of the rear case. Set the screws aside.

    Aggiungi Commento

    • Use the plastic opener to pry the rear case loose.

      • This can be difficult. You will need to pry around the entire edge of the rear case, not just in one place.

    Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Nick White

Membro da: 18/10/2013

827 Reputazione

8 Guide realizzate

Team

Clemson, Team 13-1, Benson Fall 2013 Membro di Clemson, Team 13-1, Benson Fall 2013

CLEM-BENSON-F13S13G1

3 Membri

16 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 171