Salta al contenuto principale

LG CG180 Circuit Board Replacement

Cosa ti serve

  1. LG CG180 Circuit Board Replacement, Battery: passo 1, immagine 1 di 1
    • Power down the cell phone by pressing and holding down the red "end call" button.

  2. LG CG180 Circuit Board Replacement: passo 2, immagine 1 di 1
    • Turn the phone screen-down so you are looking at the back cover.

  3. LG CG180 Circuit Board Replacement: passo 3, immagine 1 di 2 LG CG180 Circuit Board Replacement: passo 3, immagine 2 di 2
    • Slide the back cover down using your finger to remove the cover from the phone.

  4. LG CG180 Circuit Board Replacement: passo 4, immagine 1 di 1
    • Place your finger at the top of the battery in small gap.

  5. LG CG180 Circuit Board Replacement: passo 5, immagine 1 di 1
    • Press downward while pulling outward to remove the battery.

  6. LG CG180 Circuit Board Replacement, Hardshell Case: passo 6, immagine 1 di 1
    • Remove all four screws on the back of the phone using a Phillips #00 screwdriver.

  7. LG CG180 Circuit Board Replacement: passo 7, immagine 1 di 1
    • Insert a plastic opening tool in the seam.

  8. LG CG180 Circuit Board Replacement: passo 8, immagine 1 di 2 LG CG180 Circuit Board Replacement: passo 8, immagine 2 di 2
    • Run the tool along the seam to release all the tabs.

  9. LG CG180 Circuit Board Replacement: passo 9, immagine 1 di 2 LG CG180 Circuit Board Replacement: passo 9, immagine 2 di 2
    • Pull the phone back cover off once all the tabs are released.

  10. LG CG180 Circuit Board Replacement: passo 10, immagine 1 di 1
    • Push the contents of the phone away from the hardshell case by applying pressure to the keypad with both thumbs.

  11. LG CG180 Circuit Board Replacement: passo 11, immagine 1 di 1
    • The hardshell case is separated from the rest of the phone.

  12. LG CG180 Circuit Board Replacement, Keypad: passo 12, immagine 1 di 2 LG CG180 Circuit Board Replacement, Keypad: passo 12, immagine 2 di 2
    • Separate keypad from circuit board by turning it upside down and allowing it to fall off.

  13. LG CG180 Circuit Board Replacement, Display: passo 13, immagine 1 di 1
    • Place the circuit board with the display facing downward.

  14. LG CG180 Circuit Board Replacement: passo 14, immagine 1 di 1
    • Use thumb to release both white clips at the top of the circuit board.

    • Be careful with the display because it is still attached by electrical tape.

  15. LG CG180 Circuit Board Replacement: passo 15, immagine 1 di 2 LG CG180 Circuit Board Replacement: passo 15, immagine 2 di 2
    • Once both clips are released, turn over the circuit board so that the display is facing upward.

    • Carefully lift the display from the left side and open to the right.

  16. LG CG180 Circuit Board Replacement: passo 16, immagine 1 di 1
    • Carefully remove the electrical tape from the display.

  17. LG CG180 Circuit Board Replacement: passo 17, immagine 1 di 1
    • The display is disconnected from the circuit board.

  18. LG CG180 Circuit Board Replacement, Circuit Board: passo 18, immagine 1 di 1
    • The circuit board is separated from the rest of the phone.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Team

Cal Poly, Team 14-42, Regan Winter 2010 Membro di Cal Poly, Team 14-42, Regan Winter 2010

CPSU-REGAN-W10S14G42

4 Membri

10 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 3

Tutti i Tempi: 2,810