Salta al contenuto principale

LG Aristo Screen Replacement

Cosa ti serve

  1. LG Aristo Screen Replacement, Screen: passo 1, immagine 1 di 1
    • Turn off the device and make sure you are working on a flat, lit surface.

  2. LG Aristo Screen Replacement: passo 2, immagine 1 di 2 LG Aristo Screen Replacement: passo 2, immagine 2 di 2
    • Use an iFixit opening tool to pry off the back case.

  3. LG Aristo Screen Replacement: passo 3, immagine 1 di 3 LG Aristo Screen Replacement: passo 3, immagine 2 di 3 LG Aristo Screen Replacement: passo 3, immagine 3 di 3
    • Remove the SD and SIM cards by sliding the cards out with your finger.

  4. LG Aristo Screen Replacement: passo 4, immagine 1 di 3 LG Aristo Screen Replacement: passo 4, immagine 2 di 3 LG Aristo Screen Replacement: passo 4, immagine 3 di 3
    • Remove the battery by prying it up with a fingernail or opening tool from the bottom edge.

  5. LG Aristo Screen Replacement: passo 5, immagine 1 di 2 LG Aristo Screen Replacement: passo 5, immagine 2 di 2
    • Remove the ten screws from the midframe with a Phillips #000 screwdriver.

  6. LG Aristo Screen Replacement: passo 6, immagine 1 di 2 LG Aristo Screen Replacement: passo 6, immagine 2 di 2
    • Pry up on the screen with a plastic opening tool.

    • Try to avoid using a metal spudger as shown in the images as it has the possibility to damage the screen.

  7. LG Aristo Screen Replacement: passo 7, immagine 1 di 2 LG Aristo Screen Replacement: passo 7, immagine 2 di 2
    • Detach the cables from the press fit connectors.

    • There are four connectors in total, they consist of two on the cameras, one on the ear jack, and the one attached to the motherboard.

    • You can lift them up with you finger or you can use tweezers (optional).

  8. LG Aristo Screen Replacement: passo 8, immagine 1 di 2 LG Aristo Screen Replacement: passo 8, immagine 2 di 2
    • Gently remove the motherboard.

  9. LG Aristo Screen Replacement: passo 9, immagine 1 di 1
    • Replace the screen.

Conclusione

To reassemble your device, follow these instructions in reverse order. I hope that these steps have helped you with your issue.

Altre 2 persone hanno completato questa guida.

Team

Gateway, Team S1-G5, Saknee Fall 2019 Membro di Gateway, Team S1-G5, Saknee Fall 2019

GCC-SAKNEE-F19S1G5

4 Membri

1 Guida realizzata

Un commento

Do i need Loca Glue to replace the outer Glass?

chuck - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 5

Ultimi 30 Giorni: 10

Tutti i Tempi: 1,329