Salta al contenuto principale

Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.

Cosa ti serve

  1. Attenzione: i passaggi 1-3 provengono da una guida contrassegnata come in corso.

    Questo passaggio è privo di traduzione. Aiuta a tradurlo

    : passo 1, immagine 1 di 2 : passo 1, immagine 2 di 2
    • Turn the phone upside down so that the bottom of the back is facing you.

  2. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    : passo 2, immagine 1 di 2 : passo 2, immagine 2 di 2
    • Slide the back down towards you and remove the back cover. You should hear a slight click as the cover comes off.

  3. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    : passo 3, immagine 1 di 1
    • Gently remove the battery from the device.

  4. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    : passo 4, immagine 1 di 3 : passo 4, immagine 2 di 3 : passo 4, immagine 3 di 3
    • Using the plastic opening tool, wedge it around the edge of the phone to release the front plastic piece from the phone.

    • Be careful when using the plastic opening tool not to brute force the phone open, the plastics are fragile.

  5. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    : passo 5, immagine 1 di 2 : passo 5, immagine 2 di 2
    • After separating the two plastic halves of the phone, take the plastic that does not have the motherboard attached to it. The plastic has a small yellow component with a lob-sided magnet within it. This is the vibrator of the phone, pull this piece out with your hand. This piece is free floating and will simply drop out.

Linea Traguardo

Nathanael Knight

Membro da: 03/27/18

181 Reputazione

2 Guide realizzate

Team

IUPUI, Team S3-G1, Harley Spring 2018 Membro di IUPUI, Team S3-G1, Harley Spring 2018

IUPUI-HARLEY-S18S3G1

3 Membri

2 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 6

Ultimi 30 Giorni: 10

Tutti i Tempi: 126