Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Locate the small notch on the bottom right side of the phone.
-
To remove the cover, hook your thumb or fingernail into the slot. Then, gently lift the cover up and off.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Locate the small notch below the battery. You may see a white plastic notch sticking out of this space; if so, grasp that tab to pull the battery out of its compartment. If you do not see a white plastic tab, then place your fingernail in the notch and pull upward to release the battery from its compartment.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove seven of the 4.9mm tri-head screws. Keep them in a secure location.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Pry the back assembly away from the body on all four sides of the phone.
-
Start prying at the top and work around.
-
Remove the buttons for the volume and power-this will allow for easier disassembly.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Locate the black L-shaped cover at the top center of the phone.
-
Remove the piece, including the attached ribbon, and set it aside.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Use a spudger to carefully disconnect the black cable.
-
Use the spudger to carefully disconnect the brown cable.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Locate the hook at the bottom of the phone. Use the spudger unlatch the hook connecting the motherboard to the front assembly of the phone.
-
Using your fingers, gently grab the motherboard and pull.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Prior to removing the motherboard, remove the speaker from the top of the device.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Using fingers, remove the motherboard from its casing.
-