Aggiusta la tua roba Comunità Store

Kyocera Event Motherboard Replacement

Cosa ti serve

  1. Kyocera Event Motherboard Replacement, Battery: passo 1, immagine 1 di 3 Kyocera Event Motherboard Replacement, Battery: passo 1, immagine 2 di 3 Kyocera Event Motherboard Replacement, Battery: passo 1, immagine 3 di 3

    • Locate the small notch on the bottom right side of the phone.

    • To remove the cover, hook your thumb or fingernail into the slot. Then, gently lift the cover up and off.

    • The back cover may flex slightly as you remove it. This is normal, but avoid applying excessive force.

    Modifica

  2. Kyocera Event Motherboard Replacement: passo 2, immagine 1 di 1

    • Locate the small notch below the battery. You may see a white plastic notch sticking out of this space; if so, grasp that tab to pull the battery out of its compartment. If you do not see a white plastic tab, then place your fingernail in the notch and pull upward to release the battery from its compartment.

    • The plastic prying tool can be used to help remove the battery.

    Modifica

  3. Kyocera Event Motherboard Replacement, Remove the screws.: passo 3, immagine 1 di 2 Kyocera Event Motherboard Replacement, Remove the screws.: passo 3, immagine 2 di 2

    • Remove seven of the 4.9mm tri-head screws. Keep them in a secure location.

    Modifica

  5. Kyocera Event Motherboard Replacement, Remove the back assembly: passo 4, immagine 1 di 3 Kyocera Event Motherboard Replacement, Remove the back assembly: passo 4, immagine 2 di 3 Kyocera Event Motherboard Replacement, Remove the back assembly: passo 4, immagine 3 di 3

    • Pry the back assembly away from the body on all four sides of the phone.

    • Start prying at the top and work around.

    • Remove the buttons for the volume and power-this will allow for easier disassembly.

    • The back assembly is firmly attached to the body of the phone so removing it will require some force.

    Modifica

  6. Kyocera Event Motherboard Replacement, Motherboard: passo 5, immagine 1 di 2 Kyocera Event Motherboard Replacement, Motherboard: passo 5, immagine 2 di 2

    • Locate the black L-shaped cover at the top center of the phone.

    • Remove the piece, including the attached ribbon, and set it aside.

    Modifica

  7. Kyocera Event Motherboard Replacement, Disconnect Cables: passo 6, immagine 1 di 3 Kyocera Event Motherboard Replacement, Disconnect Cables: passo 6, immagine 2 di 3 Kyocera Event Motherboard Replacement, Disconnect Cables: passo 6, immagine 3 di 3

    • Use a spudger to carefully disconnect the black cable.

    • Use the spudger to carefully disconnect the brown cable.

    Modifica

  8. Kyocera Event Motherboard Replacement: passo 7, immagine 1 di 2 Kyocera Event Motherboard Replacement: passo 7, immagine 2 di 2

    • Locate the hook at the bottom of the phone. Use the spudger unlatch the hook connecting the motherboard to the front assembly of the phone.

    • Using your fingers, gently grab the motherboard and pull.

    Modifica

  9. Kyocera Event Motherboard Replacement: passo 8, immagine 1 di 1

    • Prior to removing the motherboard, remove the speaker from the top of the device.

    Modifica

  10. Kyocera Event Motherboard Replacement: passo 9, immagine 1 di 1

    • Using fingers, remove the motherboard from its casing.

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

con 7 altri collaboratori

Sydney

Membro da: 02/11/15

19 Reputazione

1 Guida realizzata

Distintivi: 6

+3 altri distintivi

Team

Ohio State, Team 1-3, Michaels Spring 2015 Membro di Ohio State, Team 1-3, Michaels Spring 2015

OSU-MICHAELS-S15S1G3

4 Membri

2 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 4

Tutti i Tempi: 829