Salta al contenuto principale

Introduzione

This guide will walk you through how to remove the camera lens off the back of a Kyocera Event.

Parti

Nessuna parte specificata.

  1. Flip phone over and remove back cover Flip phone over and remove back cover Flip phone over and remove back cover
    • Flip phone over and remove back cover

  2. Use the screwdriver with the Y0 bit attached to take out the seven 5mm screws that attach the back cover on the phone.  Make sure to keep track of these screws, as they are pretty important.
    • Use the screwdriver with the Y0 bit attached to take out the seven 5mm screws that attach the back cover on the phone. Make sure to keep track of these screws, as they are pretty important.

  3. Kit riparazione batterie MacBook

    A partire da $69.99

    Buy Now

    Kit riparazione batterie MacBook

    A partire da $69.99

    Buy Now
  4. Next, use the metal spudger to pry at the plastic clips.  Be careful to not to lose the power button and volume buttons as they fall out.  Remove the plug for the camera flash.
    • Next, use the metal spudger to pry at the plastic clips. Be careful to not to lose the power button and volume buttons as they fall out. Remove the plug for the camera flash.

  5. Use the spudger to pry the camera lens and remove it from the rear frame.  Then you can replace the lens. Use the spudger to pry the camera lens and remove it from the rear frame.  Then you can replace the lens. Use the spudger to pry the camera lens and remove it from the rear frame.  Then you can replace the lens.
    • Use the spudger to pry the camera lens and remove it from the rear frame. Then you can replace the lens.

Conclusione

To reassemble your device, follow these instructions in reverse order.

ryan

Membro da: 16/03/2015

221 Reputazione

1 Guida realizzata

Team

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 2

Ultimi 7 Giorni: 3

Ultimi 30 Giorni: 23

Tutti i Tempi: 749