Salta al contenuto principale

Kolcraft Cloud Plus "Free-Stand" Button Replacement

Cosa ti serve

  1. Kolcraft Cloud Plus "Free-Stand" Button Replacement, "Free-Stand" Button: passo 1, immagine 1 di 2 Kolcraft Cloud Plus "Free-Stand" Button Replacement, "Free-Stand" Button: passo 1, immagine 2 di 2
    • Unscrew the two, 27mm Phillips #2 screws from the back of the “Free-Stand” button case.

    • You may want to flip the stroller over to access the screws.

  2. Kolcraft Cloud Plus "Free-Stand" Button Replacement: passo 2, immagine 1 di 1
    • Remove the back cover of the case by lifting it straight up.

  3. Kolcraft Cloud Plus "Free-Stand" Button Replacement: passo 3, immagine 1 di 1
    • The spring may pop out while removing the "Free Stand" button, so lift the button slowly to avoid losing the spring.

    • To access the spring, remove the red, "Free-Stand" button by lifting it straight up.

  4. Kolcraft Cloud Plus "Free-Stand" Button Replacement: passo 4, immagine 1 di 1
    • If the spring does not come out when you remove the "Free-Stand" button, lift the spring out of the case so it can be fixed or replaced.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Team

Cal Poly, Team 11-1, Forte Fall 2015 Membro di Cal Poly, Team 11-1, Forte Fall 2015

CPSU-FORTE-F15S11G1

4 Membri

3 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 4

Ultimi 7 Giorni: 5

Ultimi 30 Giorni: 30

Tutti i Tempi: 1,249