Kodak S100 EF Flash Capacitor Replacement - Guida di riparazione iFixit

Introduzione

Back Cover Teardown guide must be used first to get inside the camera. Later, soldering guides will be used.

Cosa ti serve

Passo 1 Back Cover

Kodak S100 EF Flash Capacitor Replacement, Back Cover: passo 1, immagine 1 di 2

Kodak S100 EF Flash Capacitor Replacement, Back Cover: passo 1, immagine 2 di 2

Remove the two 6.2mm Phillips screws on both sides of camera's back cover.

Passo 2

Kodak S100 EF Flash Capacitor Replacement: passo 2, immagine 1 di 1

Turn camera so the bottom is facing up and the front is facing away.
Remove the two 6.2mm Phillips screws on the bottom back cover of the camera.
Back cover is now unscrewed an can be removed.

Passo 3

Kodak S100 EF Flash Capacitor Replacement: passo 3, immagine 1 di 1

Have the back of the camera facing up.
Unscrew the 6.2mm Phillips screw next to the viewfinder.
The back cover is now unscrewed. Lift up and pull the cover off evenly.

Passo 4 Flash Capacitor

Kodak S100 EF Flash Capacitor Replacement, Flash Capacitor: passo 4, immagine 1 di 1

The capacitor is located at the bottom center of the camera.

Passo 5

Kodak S100 EF Flash Capacitor Replacement: passo 5, immagine 1 di 1

Desolder the two connections at the top of the flash capacitor.
If unfamiliar with soldering, refer to the guide Come saldare e dissaldare componenti elettrici

Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

con 3 altri collaboratori

Michelle

Membro da: 04/04/11

107 Reputazione

5 Guide realizzate

+6 altri distintivi

Team

Cal Poly, Team 25-28, Garner Spring 2011 Membro di Cal Poly, Team 25-28, Garner Spring 2011

CPSU-GARNER-S11S25G28

4 Membri

6 Guide realizzate

0 Commenti

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 8

Tutti i Tempi: 2,347