Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Press down on the battery cover and slide outwards to open.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove a total of four 5mm JIS #000 screws from around the camera:
-
Two screws from the right side.
-
Two screws from the left side.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the single 5mm Phillips #00 screw from the bottom.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Open the flash module.
-
Remove the two 6mm JIS #00 screws found inside of the flash housing.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Use a plastic opening tool to pry apart both halves of the camera.
-
Remove the back panel.
-
Annulla: non ho completato questa guida.
Un'altra persona ha completato questa guida.