Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Place thumb firmly on battery cover.
-
Slide thumb right, the cover should follow and pop up.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Place thumb on orange tab and pull back towards screen.
-
The battery should pop up.
-
Gently lift battery out.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove screws from along outer edge of casing.
-
There are 6 screws in total.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove screws along side.
-
Gently peel off side casing.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Gently lift up the LCD screen after removing back casing.
-
Find the point where the orange ribbon cable attaches to mother board.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Use plastic opening tool to gently lift up on the ribbon cable fastener.
-
Note: It does not take much pressure to release fastener.
-
Annulla: non ho completato questa guida.
Un'altra persona ha completato questa guida.