Salta al contenuto principale

Kodak EasyShare M2008 LCD Screen Replacement

Cosa ti serve

  1. Kodak EasyShare M2008 LCD Screen Replacement, Battery: passo 1, immagine 1 di 2 Kodak EasyShare M2008 LCD Screen Replacement, Battery: passo 1, immagine 2 di 2
    • Place thumb firmly on battery cover.

    • Slide thumb right, the cover should follow and pop up.

  2. Kodak EasyShare M2008 LCD Screen Replacement: passo 2, immagine 1 di 2 Kodak EasyShare M2008 LCD Screen Replacement: passo 2, immagine 2 di 2
    • Place thumb on orange tab and pull back towards screen.

    • The battery should pop up.

    • Gently lift battery out.

  3. Kodak EasyShare M2008 LCD Screen Replacement, Device Casing: passo 3, immagine 1 di 3 Kodak EasyShare M2008 LCD Screen Replacement, Device Casing: passo 3, immagine 2 di 3 Kodak EasyShare M2008 LCD Screen Replacement, Device Casing: passo 3, immagine 3 di 3
    • Remove screws from along outer edge of casing.

    • There are 6 screws in total.

    • Righty tighty, lefty loosey!

  4. Kodak EasyShare M2008 LCD Screen Replacement: passo 4, immagine 1 di 3 Kodak EasyShare M2008 LCD Screen Replacement: passo 4, immagine 2 di 3 Kodak EasyShare M2008 LCD Screen Replacement: passo 4, immagine 3 di 3
    • Gently lift off front and back casing.

  5. Kodak EasyShare M2008 LCD Screen Replacement: passo 5, immagine 1 di 3 Kodak EasyShare M2008 LCD Screen Replacement: passo 5, immagine 2 di 3 Kodak EasyShare M2008 LCD Screen Replacement: passo 5, immagine 3 di 3
    • Remove screws along side.

    • Gently peel off side casing.

  6. Kodak EasyShare M2008 LCD Screen Replacement, LCD Screen: passo 6, immagine 1 di 2 Kodak EasyShare M2008 LCD Screen Replacement, LCD Screen: passo 6, immagine 2 di 2
    • Gently lift up the LCD screen after removing back casing.

    • Find the point where the orange ribbon cable attaches to mother board.

  7. Kodak EasyShare M2008 LCD Screen Replacement: passo 7, immagine 1 di 2 Kodak EasyShare M2008 LCD Screen Replacement: passo 7, immagine 2 di 2
    • Use plastic opening tool to gently lift up on the ribbon cable fastener.

    • Note: It does not take much pressure to release fastener.

  8. Kodak EasyShare M2008 LCD Screen Replacement: passo 8, immagine 1 di 1
    • Lift LCD Screen off of device.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Brian

Membro da: 03/13/14

252 Reputazione

2 Guide realizzate

Team

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 3

Tutti i Tempi: 208