Parti

Nessuna parte richiesta.

  1. Place thumb firmly on battery cover.
    • Place thumb firmly on battery cover.

    • Slide thumb right, the cover should follow and pop up.

    Aggiungi Commento

  2. Place thumb on orange tab and pull back towards screen.
    • Place thumb on orange tab and pull back towards screen.

    • The battery should pop up.

    • Gently lift battery out.

    Aggiungi Commento

    • Remove screws from along outer edge of casing.

    • There are 6 screws in total.

    • Righty tighty, lefty loosey!

    Aggiungi Commento

  3. Diffondi allegria Fixmas
    Ottieni $12 sul tuo acquisto di $50 o più con il codice FIXMAS12
    Diffondi allegria Fixmas
    Ottieni $12 sul tuo acquisto di $50 o più con il codice FIXMAS12
    • Gently lift off front and back casing.

    Aggiungi Commento

    • Remove screws along side.

    • Gently peel off side casing.

    Aggiungi Commento

    • Gently lift up the LCD screen after removing back casing.

    • Find the point where the orange ribbon cable attaches to mother board.

    Aggiungi Commento

    • Use plastic opening tool to gently lift up on the ribbon cable fastener.

    • Note: It does not take much pressure to release fastener.

    Aggiungi Commento

    • Lift LCD Screen off of device.

    Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Brian

Membro da: 13/03/2014

252 Reputazione

2 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 3

Tutti i Tempi: 102