Introduzione

Use this guide to remove the back case.

Parti

Nessuna parte richiesta.

  1. Position the camera with the bottom facing up.
    • Position the camera with the bottom facing up.

    • With your finger, slide the battery cover in the direction of open arrow.

    • The battery cover will spring open, so be careful to lift it up gently.

    Aggiungi Commento

  2. Use a Phillips #00 screwdriver to remove the seven 4.5mm screws.
    • Use a Phillips #00 screwdriver to remove the seven 4.5mm screws.

      • There are 2 on the left

      • There are 2 on the right

      • There are 3 on the bottom

    Aggiungi Commento

    • Firmly grasp and pull back casing off.

    Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Dustin Rodgers

Membro da: 05/10/2010

50 Reputazione

4 Guide realizzate

Team

Cal Poly, Team 7-51, Amido Fall 2010 Membro di Cal Poly, Team 7-51, Amido Fall 2010

CPSU-AMIDO-F10S7G51

4 Membri

7 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 1

Tutti i Tempi: 1,388