Salta al contenuto principale

KitchenAid KSM150PSER Circuit Board Replacement

Cosa ti serve

  1. KitchenAid KSM150PSER Circuit Board Replacement, Circuit Board: passo 1, immagine 1 di 2 KitchenAid KSM150PSER Circuit Board Replacement, Circuit Board: passo 1, immagine 2 di 2
    • Using a Phillips #2 screwdriver, remove the 10mm screw on the back cover by rotating it counterclockwise.

    • The back cover is now free. Remove it by pulling it back and up.

    • Ensure that the mixer is disconnected from any electrical source prior to removing the back cover.

  2. KitchenAid KSM150PSER Circuit Board Replacement: passo 2, immagine 1 di 2 KitchenAid KSM150PSER Circuit Board Replacement: passo 2, immagine 2 di 2
    • Using a Phillips #1 screwdriver, remove the 9.5mm screw above the circuit board by rotating it counterclockwise.

    • If you can't see the screw, try pulling the seal down past the wires to make the screw more accessible.

  3. KitchenAid KSM150PSER Circuit Board Replacement: passo 3, immagine 1 di 2 KitchenAid KSM150PSER Circuit Board Replacement: passo 3, immagine 2 di 2
    • Using pliers or tweezers, remove the connectors of the four wires attached to the circuit board.

  4. KitchenAid KSM150PSER Circuit Board Replacement: passo 4, immagine 1 di 1
    • Grab the wires and tilt the edge of the board up to lift the circuit board up and out.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 4 persone hanno completato questa guida.

Luke Leonard

Membro da: 01/24/18

562 Reputazione

2 Guide realizzate

Team

Cal Poly, Team S2-G5, Livingston Winter 2018 Membro di Cal Poly, Team S2-G5, Livingston Winter 2018

CPSU-LIVINGSTON-W18S2G5

4 Membri

10 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 10

Ultimi 30 Giorni: 44

Tutti i Tempi: 5,178