Salta al contenuto principale

KitchenAid KHM512ER Motor Replacement

Cosa ti serve

  1. KitchenAid KHM512ER Motor Replacement, Motor: passo 1, immagine 1 di 2 KitchenAid KHM512ER Motor Replacement, Motor: passo 1, immagine 2 di 2
    • Insert the back of a plastic opening tool into one of the beater holes

    • Apply force to pull the circular plastic part off.

    • If necessary, use the other side of the plastic opening tool to pry the circular plastic part off.

  2. KitchenAid KHM512ER Motor Replacement: passo 2, immagine 1 di 2 KitchenAid KHM512ER Motor Replacement: passo 2, immagine 2 di 2
    • Use a Phillips 2 screwdriver to remove the two 20mm screws holding the bottom plastic piece in place.

    • Remove the bottom plastic piece using a plastic opening tool.

    • Your screwdriver may not be long or narrow enough to reach the screws in these holes. If that's the case, use another screwdriver.

  3. KitchenAid KHM512ER Motor Replacement: passo 3, immagine 1 di 2 KitchenAid KHM512ER Motor Replacement: passo 3, immagine 2 di 2
    • Using a Phillips 2 screwdriver, remove the three 20mm screws holding the motor assembly in place.

    • Use your hands to remove the motor assembly and circuit board.

  4. KitchenAid KHM512ER Motor Replacement: passo 4, immagine 1 di 3 KitchenAid KHM512ER Motor Replacement: passo 4, immagine 2 di 3 KitchenAid KHM512ER Motor Replacement: passo 4, immagine 3 di 3
    • Firmly grip the motor in your hand. Using pliers, pull the connectors off the motors.

    • Some force may be required. Be careful not to cut yourself on any electrical components.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 2 persone hanno completato questa guida.

[deleted]

Membro da: 02/10/16

134 Reputazione

1 Guida realizzata

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 9

Ultimi 30 Giorni: 25

Tutti i Tempi: 4,542