Salta al contenuto principale

Kirby G5 Vacuum Belt Replacement

Cosa ti serve

  1. Kirby G5 Vacuum Belt Replacement, Vacuum Belt: passo 1, immagine 1 di 1
    • Place the vacuum at an angle most comfortable and easy to access with the bottom facing upwards.

  2. Kirby G5 Vacuum Belt Replacement: passo 2, immagine 1 di 2 Kirby G5 Vacuum Belt Replacement: passo 2, immagine 2 di 2
    • Remove the three screws holding the base plate to the body of the vacuum using a flat head screwdriver.

    • Place the plate to the side.

  3. Kirby G5 Vacuum Belt Replacement: passo 3, immagine 1 di 1
    • Simply slide the roller out of the vacuum.

    • The belt is attached to the roller on either side.

  4. Kirby G5 Vacuum Belt Replacement: passo 4, immagine 1 di 2 Kirby G5 Vacuum Belt Replacement: passo 4, immagine 2 di 2
    • Slide the vacuum belt out from beneath the wheel holding it in place.

  5. Kirby G5 Vacuum Belt Replacement: passo 5, immagine 1 di 1
    • Insert your new belt and pop the roller back into place.

  6. Kirby G5 Vacuum Belt Replacement: passo 6, immagine 1 di 2 Kirby G5 Vacuum Belt Replacement: passo 6, immagine 2 di 2
    • Secure the plate once again until it clicks into the made grooves.

    • Secure the three screws until tightened.

Conclusione

Make sure to test the vacuum and securely tighten all screws. With that, you’re good to go!

Un'altra persona ha completato questa guida.

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 3

Ultimi 7 Giorni: 8

Ultimi 30 Giorni: 41

Tutti i Tempi: 952